Arccaptain Recenzje 100

Product works great used the plasma cutter often in my shop. I built a rear bumper for my skidsteer. Unfortunately short time after building that bumper. I had a capacitor fail on the plasma cutter and arccaptians service department was great to talk to and sent a replacement plasma cutter

I will order from them again. I'm just getting started with welding and Arccaptain was recommended by a colleague. For my first order, I only needed a helmet and gloves. Prices were excellent and delivery quick. Unfortunately, my helmet didn't arrive but a simple call to Tina in customer support set thing right. I'm looking forward to trying out my new Arccaptain PSE.

Great experience. Initial order was placed through website. Made some mistakes. Ordered Friday. Noticed mistakes Saturday morning. Contact through email got a response by Tuesday the following week. I also messaged on instagram Sunday got a response within 24hrs. So they did better responding on instagram. Anyways they corrected my order which included removing an item and refunding the amount as well as correcting the MiG I ordered. Which was my fault. I wanted the 200 FIT from the ‘MiG 165. Everything got shipped within a week or so.

Poor experience on the 200, the welder looks great when it arrived. Put the 2lb spool on and the wire feeding motor isn't working at all. 2weeks later after calls and multi emails, I'm shipping the unit back to the company at my expense. Stick welder side worked just fine but 80% of my welding is lite metal and I needed the the mig welder which I never got to use with unit.

I made a mistake on an order and emailed support right away. I immediately got an email back confirming the correction. Thats true customer service.

I'm a beginning welder and purchased an ARCCAPTAIN MG165. The machine works great but I had one issue that was really causing me problems. I contacted customer service and Kelsey quickly identified a simple solution to my issue and now my experience with the welder is 100% better, I wish every business would have such wonderful customer service people.
Tom Romanowski

Great support, I did not receive a manual with my welder, called and talked to Kelsey,she said I could down load and print the manual, told her my printer was not working she said on problem and sent me a printed copy right away, super service, from super person welder works GREAT great product well made

Top notch people working for a top notch company making a great product -- Thank you! Kelsey was my point of contact and provided assistance as I had made an error on my order. Kelsey and the team corrected my mistake and got the correct unit -- a CUT55 PRO plasma cutter -- shipped lightning fast and it arrived in perfect condition. We qualified it and were using it in less than an hour from unboxing! Thanks Kelsey and thanks to all in ArcCaptain.

ordered a welder canceled order they said it shipped refuse delivery so I did they never issued a refund and bank refuses to help on charge back

customer service was great at solving my problem

The way the air connection is mounted is very flimsy, it’s very difficult to tighten the air connection enough to stop leaking….and without breaking the air cleaner.

I had a good experience with ARCCAPTAIN. My parcel was delayed Dey to weather. When I contacted ARCCAPTAIN they replied in a timely manner. Thank you.

An amazing Welder, Hands down!! infinite adjustments.
Incredibly smooth and stable arc through both DC and AC functions. This really gives you a high-performance welder at a very affordable price. Highly recommended you won’t be disappointed. Also, I’d like to note the customer service I received from Angelo and Kelsey of Arccaptain was over the top!! I’ll be back soon for more for sure!!

Andi Humenik

I am very pleased with the MIG250 and Arch plasma cutter I received. Kelsey was very helpful with a concern I had and it was resolved with professionalism and curiosity. Highly recommend their products!

Hola compré una mig 205mp, la compré en noviembre y me llegó a canarias el 17 de febrero aquí en canarias me pedían un montón de cosas para pasar la aduana y whiney me ayudó bastante y nunca me dejó "solo" con los papeles que los pedían de una forma luego de otra y como dije estuvieron siempre ahí, en cuanto a la máquina solo he podido probar mma y fabulosa solo una cosa que tendre que hablar con ellos y es que al poner mma en syn y pones el calibre del electrodo ejemplo 2,5mm dice la máquina que va de 90 a 130 A cuando es de 60 a 85A depende marca del electrodo pero de 90 a 130A es mucho para ese electrodo, esperemos que lo demás esté bien, pero como te dije no me han dejado solo

📻 Consumer Protection Alert – Serious Order & Billing Concerns

⚠️ Public Consumer Warning Regarding Arccaptain Welding Equipment

This is a consumer alert for anyone considering purchasing welding equipment from Arccaptain.

I recently ordered a welding machine — Order #78355, the MIG205 Pro model. Shortly after placing the order, I attempted multiple times to contact customer service to cancel or modify it. Emails went unanswered. Phone calls were not picked up. The only response was automated messaging saying no one was available.

After repeated attempts, a representative finally called back and clearly stated that Order #78355 would be canceled. I was instructed to place a new order for the correct model. Following their instructions, I placed Order #78547 — the MIG205MP All-in-One Pulse MIG Welder and Cutter Combo with upgraded kit.

The next day, my credit card was charged for the original order that was supposedly canceled.

When I called again, I was told that Order #78355 was not canceled and was already scheduled for delivery.

Let’s be clear about what this means:

• A confirmed cancellation was not honored.
• A customer was charged for an order that was supposed to be voided.
• Phone support was largely unreachable.
• Emails were ignored.
• Conflicting information was provided by company representatives.

For a company selling professional-grade welding equipment, this level of disorganization is alarming.

If basic order management and communication cannot be handled properly, consumers must ask serious questions:

What happens if the equipment fails?
What happens if warranty service is needed?
What happens if there is a safety issue?

Reliable tools require reliable support.

Consumers should exercise caution and carefully document all communication when dealing with this company. Transparency, accountability, and customer service are not optional in the professional equipment industry.

This experience raises significant concerns about internal processes and customer protection standards.

Buyers deserve better.
They send it both orders :(
My orders: 1st 78355 / 2nd 78547
Which they’re supposed to send only the second order only :( orders: 2nd 78547
They charged me for both orders: 1st 78355 / 2nd 78547 :( which the 1st 78355 order supposed to cancelled:(
And I miss some items on the second orders: 2nd 78547
I contacted them no reply back. I called them. No one is picking the phone up. All way it say no one is in the office.

I purchased a spool gun for a mig 250 from arccaptain Web site. After receiving it i have noticed it does not have 030 or 035 tip for feed. I have exhausted my attempts to contact them wth no resolution I am so upset with this service I am regretting have purchased from this company if this is how they do business. they have answered my email and have sent the replacement part did have to wait came from China but now i can use it.

Great experiences from Arccaptain so far! Ordering was quick and easy, it arrived to my local hub quickly, but getting the package was a bit of a challenge (absolutely not an Arccaptain issue at all, FedEx Ground is and has been suffering from serious operational issues for years in my area, every package out of this hub to be delivered in my area is always delayed by days).

Reached out to Arccaptain customer service to see whether they might have had any additional insights into what was going on with FedEx, and Shirley responded promptly. While they couldn't provide any additional insights, it was great knowing customer service was right around the corner!

Finally received the package from FedEx more than 1 month later. Got my Cut50 set up on 240V and put it through a few initial cuts to ensure it at least worked out of the box, and it did perfect! Works great so far, and is a fantastic accompaniment to the welding outfit in my garage.

Looking forward to years of service out of it!

This machine is fantastic, reduces your time by at least half. Seller responds promptly when contacted. I did not receive my accessories kit with my machine; they promptly sent a second kit, I then received both and they graciously gave me the second kit for free.

Great company!

Had a minor issue while ordering (totally my fault), as I forgot to add a discount code. I am very satisfied with Shirley helping me get straightened out. There is a time zone difference between me (EST) and their support team, and replies come back in about a day.. Fast enough for me. Regarding the machine, the 205mp has more features than my $8000 blue multi- process welder at work. For the features this offers, at the price it is sold for, cannot be found elsewhere on the market. The honest reviews on youtube conducted by seasoned veteran welders (nobswelding) indicate this is a quality machine. I spoke with some of the guys in our maintenance shop, and after seeing the price point and features, one of them is thinking of getting one for himself. Once I get and use the machine I will attempt a follow-up review.