Bradite White One Can Matt Recenzje

Bradite One Can Matt This single-component, water-thinned primer and finish coat is formulated to provide fast-drying, low-odour coverage with excellent adhesion and anti-corrosive properties. Suitable for a wide range of surfaces, including masonry, metals, plastics, wood, ceramic tiles, and previously painted surfaces, it is ideal for both interior and exterior applications. Available in RAL, British Standard, and NCS colours, it offers reliable stain blocking, scuff resistance, and weatherproofing to protect surfaces against environmental wear. Key Benefits Quick-drying with a surface dry time of 30 minutes and a minimum overcoat time of 1 hour. Low-odour formula, making it suitable for use in enclosed or sensitive environments. Excellent adhesion to a variety of surfaces, including difficult substrates like uPVC and melamine. Encapsulates stains such as watermarks, nicotine, and resin, preventing bleed-through and providing a smooth finish. Anti-corrosive protection for ferrous and non-ferrous metals, reducing the risk of rusting. Manufactured to high environmental standards, including ISO 14001:2004 compliance, with a low VOC content of 25g/L. Application and Usage This product is designed for use on a wide range of substrates, from interior and exterior walls to trim, metal surfaces, and exterior cladding. It is especially suited for coating over existing cladding materials such as plastisol, coil, or powder coatings. When applying to masonry or concrete, ensure the substrate is clean, dry, and sound for optimal adhesion. Surfaces like galvanised steel, aluminium, or stainless steel should be degreased and lightly abraded before application. Brush, roller, conventional, or airless spraying methods are recommended for application. Ensure all surfaces are free from loose materials, dust, and grease prior to coating. Cleaning tools after use is easy with water. Restrictions and Recommendations This product is not suitable for use on lime or natural plasters. When applied over new wood, ensure the wood’s moisture content is below 15% to avoid flaking or blistering. It should not be applied to damp wood, as this can lead to premature failure of the coating. Surfaces that have been painted with this product can be recoated after a minimum drying time of 1 hour, with no maximum overcoating time limit. Health and Safety UN Number: 3082 Always refer to the product’s data sheet for complete safety instructions. Protective equipment such as gloves and masks is recommended during use.