Max Torque Cans Recenzje 

Got my exhaust done sounds exactly how I wanted it and couldn't be happier with result. Price was very reasonable. If you want your bike exhaust doing these are the people to get in contact with. Thanks MTC for all your help

I needed some custom race cans for my track bike and these guys were more than happy to make exactly what I wanted from the drawing I sent them all for a reasonable price

Same experience as the chap below, our Ducati Panigale was abused by this firm. I heard a story whereby Martin Leigh the owner of this firm had been summoned to court a few years back for servicing a chaps bike and leaving the oil drain plug loose .... Inevitably the plug came loose, the chap had a nasty accident and the incident reported to the police and a subsequent court case commenced. "On oath" Martin Leigh Max Torque Cans, swore blind he did not service the bike, instead stating an employee must have commissioned the service without his knowledge and then threw one of his workers under the bus! An ex employee recently reached out to us and explained to us how they fitted the new Ducati exhaust loosely then turned the bike on, silly, silly mistake! The end can according to his ex employee blew off and a blue flame entered the engine! The machine has never run the same since.... When confronting the firms MTC Exhausts, or Max Torque Cans they completely deny any knowledge of even fitting the bespoke exhaust! Completely un-trust worthy, avoid at all costs if you like your machine working. Thanks for reading.

Don't deal with these people
They had my bike for months ( Martin said this was due a particular size/bore of the downpipes) and when I got the bike back, the list of damage was
Twisted subframe
Dented tank (needed a complete respray)
Bent handlebars
Risers damaged
forward controls bent
Billet speedo and indicators damaged
Heated grips damaged
Visible weld on the downpipe
The damage was to both sides of the bike, no one in the shop knew what happened yet when Martin saw the bike, he initially offered to write a cheque but when he assured me he would replace parts like for like and would do the work himself to save costs, I agreed,
He then had the bike for another month saying he was waiting for parts.
He knocked £200 of the bill for the tank,didnt replace the speedo, forward controls still bent, reg plate still twisted.
This is a custom bike, never fired up with all parts damaged being brand new. The whole process has taken over 6 months.
Martin and the staff still deny knowing to what happened.
I can show photos of the bike before going to MTC undamaged and the bike afterwards. Would happily discuss with anyone.

Just a short note to say how pleased I was with my new slip on exhaust.
On my 1992 CB750F2n, the original pipework was replaced with a Laser Pro Dor complete system, coupled with a K&N air filter and Dyno Jet kit. As far as I could tell the pipe made little to no difference, and sounded only marginally different and not better.
Due to personal circumstances the bike was laid up for 15 years and returned to the road for commuting and in time for the 2019 IOM TT. It was after this that I decided to look further into the subject and eventually chose one of your Road Legal Max Torque twin output ovoid cans. My choice really came down to the fact I could actually speak to the manufacturer and talk about about my requirements. I already had the down tubes and intermediate pipe of the old system so only needed to spec a 70mm inlet in clamp fitting.
Your team were knowledgeable and helpful to my questions and a shiny new can complete with pucker heavy duty clamp (not the usual puny hosepipe clip) arrived within a week.
A whole Kilo lighter and not restricted by the excessive baffling of the Laser, the difference was immediately apparent. The tone was deeper and richer without being anti-social despite being 12dB louder even with the baffles fitted.
In terms of power, can’t say for sure, but the bike feels lighter under throttle, getting through the revs quicker and now I’ve found the clutch can’t cope, slipping in 3rd & 4th! This was later examined and I found the plates were not worn or hardened, but the springs, though within OEM tolerance were not up to the job, so were replaced with stronger ones.
On my un-calibrated dB meter, but otherwise in accordance with ISO 1530 and at 5000 rpm
I measured averages of 72dB with the baffles in and 79dB with baffles out with peaks around 86dB and pleasing howl further up the rev band.
For better aesthetics I should have paid a bit extra and had the carbon version or blue titanium, but other than that and the fact I need to tickle with the carbs, your end can has brought a smile back to my face and given the old CB750 and this rider a new lease of life.
Thanks
Del

I was looking for a link pipe and end can for my new Yamaha Tenere700, didn't fancy paying £800 plus for the Akro
Contacted Martin at Max Torque and he was happy to make the exhaust to my spec, just a bit shorter and no heat guard.
Excellent quality, easy to fit, and looks and sounds fabulous.
Great service and all for around £300.
Recommend.

Ordered exhaust came wrong but to be honest that could of bin my fault so contacted the lads and they offered to make me one the next day and send it back out very fast service well pleased with results would recommend even dads thinking of getting down pipe if them now

I called in to have a look at options for my BMW R1200RS to replace the original silencer. I came out shortly after with a Titanium round can fitted by Martin. It looks great on the bike, it's much lighter than the original, sounds great, gives more bhp and a great price.
I would recommend this company and their products to anyone.

I wanted to install the Woolich log box system on my H2 SX and there were very few places the wideband O2 sensor would fit. Just through email Martin got the bung in the right spot on the decat mid pipe they sell. It all installed perfectly.

I wanted a custom insert and even though it was a Saturday, they helped find and fit exactly what I needed - very friendly and very professional. 5 Stars!

Martin was really helpful and has supplied an excellent product, that both looks and sounds brilliant. delivery was as promised.

I brought a Titanium exhaust from Martin 2 years ago for my Fireblade 1000rr. The exhaust sounds awesome and it's still looking like new. I would recommend an MTC exhaust to anyone.

TRIUMPH EXPLORE 1200 EXHAUST HEADERS REPAIR.
Required a repair to my Explorer header/down pipes at the outlet to the link pipe (the fingers had fractured and fallen off). I could not find anyone that I thought was confident enough to carry out the repair the way I wanted it done. Luckily for me I spoke to Martin at the Scottish Motorcycle Show and he explained how he would carry out the repair. So much so I travelled down from Glasgow to his workshop. He carried out the repair showing me step by step and explaining what he was doing. Martins workmanship is second to none, Cutting a brand new pipe section, Getting the size and position perfectly before TIG welding. I would highly recommend Max Torque Cans. Martin is very approachable and will do a great job. Thanks Again MTC.

Excellent workmanship. Extremely friendly and understanding. Couldn’t ask for a better company to buy my exhaust from

I highly recommend this outstanding company for any biker who wants to purchase high quality aftermarket exhausts. they are the best quality and design I’ve personally come across. I purchased 2 road legal tri oval 145mm cans (the longer version to the shorter 130mm) with the twin tips for my ZZR 1100 D2. I’m getting them fitted soon and can’t wait. I already know they will sound a lot better than stock so thought i would write my review before I have them fitted. The Guy that runs the place Martin is a true gentlemen and you can rest assured he puts his customers first. I had a slight issue with one exhaust tip it was not matching up with the other which was bugging me and he quickly sorted it out for me and arranged for it to be collected the very next day and he even paid for returning it and delivering it back the next day. not many would do that. I’m very pleased with my purchase at MTC and I know where to come in future if I ever need an exhaust. I just hope they will remain on the bike with all those low life thieves about. Having no garage sucks.

I needed a baffle for my exhaust, after drawing a picture they made the baffle which fitted perfectly. They were super quick and couldn't do enough for me. I'd highly recommended these guys. The exhaust sounds amazing on its own but I had to baffle it for track days but it still sounds awesome.

Phoned MTC last week ref an exhaust for my Kawasaki EN500. they asked for a couple of photos, came straight back with recommendations and got it sorted there this morning. Brilliant job and highly recommended.

Martin has fitted and designed a few cans for me for a few bikes now quality always excellent
Customer service second to none
And my most recent cans fitted for my new bike had many compliments on how fantastic they look
Always 5* work

Good and fast service. i called Martin tuesday, and within an hour he started bending my link pipe, and the next morning he put together my silencer, and send it the same day. the delivery only took 3 working days.
The best thing of all is, how much power i have gained, and the super cool look and sound. It´s a perfect fit as well.
Kenni Larsen.
Denmark

Defo worth doing, my WR125x sounds great and backfires now. totally worth doing.