HKP .40 S&W - Micro Comp - Threaded 9/16x24 Recenzje

HKP .40 S&W - Micro Comp - Threaded 9/16x24 The HK Parts Micro Comp & Thread Protector is a lightweight, dual-function device serving as both a compensator and thread protector. It attaches easily to any factory spec P30/P30L barrel threaded 14.5x1, offering concealed carry gun owners improved recoil mitigation and muzzle control without adding unnecessary weight or bulk. Specifications: Threaded 14.5x1 Includes Allen Wrench Compatible With: HK VP40/VP40T HK P2000/P2000SK HK USP40 HK P30/P30L Glock Sig Sauer .40 S&W Firearms Threaded 9/16x24 Installation Guide: 1. Make sure, firearm is clear & unloaded...triple check to be sure firearm is "unloaded & safe". Apply throughly  the " Vibra Tite" to the threads of the barrel and the screws before install and let sit. 2. Screw micro comp onto barrel all the way until fully screwed on and/or stops 3. Back off and unscrew the comp as little as possible to time the 3 ports at the 12 o'clock position 4. Make sure the comp is timed with the 3 oval sized ports at 12 o'clock 5. Add a drop of blue Loctite to the threads of each set screw (red Loctite or Rockset are even better) 6. Tighten down set screws 1/4 turn at a time and rotate between them 1/4 turn at a time with the hex tool provided but do not over tighten with the provided set screw wrench (make sure the comp remains timed) 7. Using a torque wrench set at 12 pounds. Do not over tighten. The torque setting is sufficient. 8. Allow the Loctite / Rockset to cure for a few hours before taking firearm to the range Please note: Allen wrench for the set screw is included.